Ask your sales rep about Glass Clamps and Steel Tubing products.
- RAILING SYSTEMS
- Top Rails
- Stainless Steel Round Bump Formed top Rails
Stainless Steel Round Bump Formed Top Rails
-
Stainless Steel Round Top Rails
View Product Details > -
Stainless Steel Connector Sleeves
View Product Details > -
Stainless Steel Top Rail End Caps
View Product Details > -
Stainless Steel Mitered Corners
View Product Details > -
Protective Insert for Top Rails
View Product Details > -
Top Rail to Wall Support Mount
View Product Details >
-
Stainless Steel Round Top Rails
Formed type 304 and 316, welded channel, #8 (polished) and #4 (brushed) finishes are standard. Available for 1/2” glass at 10’ lengths.
S16-0112-0400
-
Stainless Steel Connector Sleeves
Connector Sleeves are used to connect Top Rail and railing sections together. Custom sizes also available.
S16-0112-0400CS
Product Details Part # A Tubing Size S16-0112CS 1 3/8" 1 1/2" x .050" wall S16-0200CS 1 7/8" 2" x .050" wall S16-0212CS 2 3/8" 2 1/2" x .065" wall S16-0300CS 2 7/8" 3" x .065" wall S16-0312CS 3 3/8" 3 1/2" x .065" wall S16-0400CS 3 7/8" 4" x .065" wall
-
Stainless Steel Top Rail End Caps
End Caps fit securely into Top Rail for a finishing accent, either welded or fastened with adhesive. Available in #8 polished or #4 brushed finish.
S16-0112-0400EC
Product Details Part # A B S16-0112EC 1 1/2" .050" S16-0200EC 2" .050" S16-0212EC 2 1/2" .065" S16-0300EC 3" .065" S16-0312EC 3 1/2" .065" S16-0400EC 4" .065"
-
Stainless Steel Mitered Corners
Fabricated from Morse Industries Top Rail and welded and finished to match. #8 (polished) and #4 (brushed) finishes are standard. All corners are fabricated per order. Please specify degree and location of glass pocket. Custom corners also available.
S16-0112-0400C
Product Details Part # A B C D S16-0112C 1 1/2" 5/8" 2 3/8" 3 1/2" S16-0200C 2" 3/4" 2 5/8" 4" S16-0212C 2 1/2" 3/4" 2 7/8" 4 1/2" S16-0300C 3" 3/4" 3 1/8" 5" S16-0312C 3 1/2" 3/4" 3 3/8" 5 1/2" S16-0400C 4" 3/4" 3 5/8" 6"
-
Protective Insert for Top Rails
Rigid vinyl protective insert is compatible with 1/2” monolithic glass. Providing a protective barrier, the insert protects glass panels when fitted inside top rail as well as aiding in alignment during installation. Stocked in 10 ft. lengths. These vinyl inserts are not compatible with 1 1/2” bump formed top rail.
V50-0001BKA10
Product Details Part # Description CAD Drawing V50-0001BKA10 Top Rail Insert for 1/2” Monolithic Glass
-
Top Rail to Wall Support Mount
Morse Industries Wall Support Mount provides lateral support if Top Rail is to be attached to a wall surface. Use #10, 82 degree countersunk fasteners. The Wall Support Mount is not designed for use with the 1 1/2” SS Bump Formed Top Rail, 1.7” SS Continuous Weld Round Top Rail, or 1.9” SS Continuous Weld Round Top Rail.
A42-0010AEY
Product Details Part # Description CAD Drawing Cut Sheet Width Height A42-0010AEY Wall Support Mount for Top Rails 3/4" 1-1/4"